LY Series Induced Draft Fan
Technical Parameters
Model |
Wind (m³/h) |
Motive Power (kw) |
Turning Speed (r/min) |
Y4-73-No10 | 38000 | Y6-11 | 900 |
Y4-73-No12 | 54000 | Y6-22 | 730 |
Y4-73-No14 | 65000 | Y6-30 | 730 |
Y4-73-No16 | 76000 | Y6-45 | 660 |
Y4-73-No18 | 85000 | Y6-75 | 550 |
Adapt hydraulic double cylinder, push kiln car to drying room or buring room.
Model | Motive Power(kw) |
Maximum Pushing Force (T) |
Maximum Travel (mm) |
Diameters of The Cylinder (mm) |
Diameters of The Piston (mm) |
YDC-60 | Y4-30 | 60 | 1650 | Φ200 | Φ100 |
YDC-50 | Y4-22 | 50 | 1650 | Φ200 | Φ100 |
YDC-30 | Y4-15 | 30 | 1650 | Φ125 | Φ70 |
YD Shydraulic Pusher
Item | YDS30 | YDS35 | YDS50 | YDS60 | YDS90 |
Maximum Pushing Force(t) |
30 | 35 | 50 | 60 | 90 |
Push speed (m/s) |
0.04 | 0.04 | 0.04 | 0 .04 | 0.04 |
Motive power (kw) |
15 | 18.5 | 22 | 30 | 45 |
Hydro-cylinder (kw) |
Φ140/Φ160 | Φ150/Φ194 | Φ180/Φ219 | Φ200/Φ245 | Φ200/Φ245 |
Drawing Machine
Item | LYS-25 | LYS-40 | LYS-50 |
Pull force(t) | 3 | 4 | 5 |
Pull speed(m/s) | 0.1 | 0.1 | 0.1 |
Motive power(kw) | 2.2 | 3 | 4 |
Drive ratio | 1:121 | 1:121 | 1:121 |
Technical Parameters
Item | TL-3 | TL-4 | TL-5.5 | TL-7.5 |
Max tractive effort (t) | 3.0 | 4.0 | 4.5 | 5.0 |
Pulling speed(m/s) | 0.1-0.36 | 0.1-0.3 | 0.1-0.3 | 0.1-0.3 |
Motive power(kw) | 3 | 4 | 5.5 | 7.5 |
Wire rope | Φ10.6×(19) Φ14.6×(19) | |||
Track | 12#U-steel outer edge of track width 920±1mm |
Hydraulic Stepping Machine
Technical Parameters
Item | YBS15 | YBS20 | YBS30 | YBS50 | YBS50 |
Max pulling force (t) | 15 | 20 | 30 | 50 | 60 |
Push speed (m/s) | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Motie power (kw) | 11 | 15 | 15 | 22 | 30 |
Hydro-cylinder (kw) | Φ140/Φ168 | Φ140/Φ168 | Φ140/Φ168 | Φ180/Φ219 | Φ200/Φ245 |
Electric Kiln Car
1. Loading 208pcs
2. Continuous working 12-16hours
3. Charging period 8-10hours
4. Power consumption 3-5kw.h
1. Size (mm) 4500*1000*2000,
2. Operating platform height :800mm
3. Motor: (60V-72V)*(1300W-1500W)
4. Front wheel 5.5-16 Malleable steel wheel,back wheel 400-14
5. Able to working 10-12hours with sufficient power, carry 12boards each time
1. Feature size : 4200×1000×1200mm
2. Motor: 60V-72V front wheel 400-12 tyre back wheel 500-14 tyre
3. Working with automatic loading adobe cutter, save at least 4 worker, carry 10-12boards each time, able to continuous working 10-12hours with sufficient power
Electric Kiln Car
1. Feature size : 2350×850×1150-2500×900×1150mm
2. Motor: (48V-60V)×(800W-1300W) front wheel 400-12 ,back wheel 450-12,chain transmission
3. Able to working 10-12hours with sufficient power, take 300-500pcs brick each time
4. Operating platform area: 1350*750*650mm(L*W*H)
5. Seat height: 650mm.
DBC Ferry Pusher
Model |
Pushing force (T) |
Distance of run (mm) |
Ferry car speed (M/min) |
Motive power (kw) |
DBC15 | 15 | 1886 | 6.4 |
Y100L 2-4-3 |